Skip to content
MOSTASIA
Guides

Permitted dimensions and axle loads in Kazakhstan

A special permit is required as soon as the loaded combination exceeds the permitted dimensions or mass. Here are the main limits and how to check them before loading.

Updated 22 September 2026

Dimensions without a permit

  • Width: 2.55 m, or 2.6 m for insulated bodies
  • Height: 4 m, or 4.3 m for multimodal platforms carrying containers and swap bodies
  • Combination length within the limit for its type

Mass and axles

Gross mass and the load on every axle and axle group are controlled, taking axle spacing into account. The same mass can be allowed on one combination and exceed the limit on another.

Which rules apply

Orders No. 342 and No. 206 as amended on 25 April 2026, and Order No. 184 in force from 22 September 2026. We recheck parameters before every shipment.

How to check your combination

Enter the dimensions and axle layout in the calculator. It shows whether a permit is required, what is exceeded and the dimensional part of the state fee.

Frequently asked questions

What if it is only a few centimetres over?

A permit is still required: even a small excess needs one.

What does weighing check?

Gross mass and the load on axles and axle groups. No brand of scales is the only legal one; what matters is calibrated equipment and staying within limits.

What are the driving rules for oversize loads?

Outside built-up areas, daylight only and at reduced speed, slower still on bridges. Above 4.5 m, clearance checks under bridges and lines.

See also

Preparing an equipment shipment?

Send drawings and the packing list — we will show what data is missing and come back with a preliminary estimate.

Request a quote